JR Americas

MP31T Wide-Voltage Brushless Torque Servo

Part Number: JRPS02414







JR - JRPS02414 - MP31T Wide-Voltage Brushless Torque Servo

Torque:68 (4.8V)oz/in /89 (7.4V)oz/in
Speed:0.19 (4.8V) /0.13 (7.4V) sec/60°

For 1/12 Scale Electric Cars and Miniature Aircraft

[Torque] 68 (4.8V) oz/in /89 (7.4V) oz/in
[Speed] 0.19 (4.8V) /0.13 (7.4V) sec/60°
[Dimensions] 1.04 x .59 x 1.3in
[Weight] 30g
[Wire Length] 300mm
[Voltage Range] 4.5V - 8.5V

Torpue Type
Slow start function
Metal Gear
With Ball Bearing (dual) 

[Slow start function] 
This function is to avoid any potential damage to the linkage on your aircrafts.On initial power up this servo returns to the neutral position very slowly to avoid this problem.

* Do not use this servo under the different voltage other than specified
* If used on a large control surface - typically aileron, rudder, elevator or flap on an airplane, Digital servos (DS · MP · MPH series) may move slightly around center while on the ground. This is an expected phenomenon, and will not occur in the air.



Voltage: 4.5-8.5V

E-Mail to a Friend